Brazil Condom Sizes • Largura Nominal • CM / MM / Inches
Use this Condom Size Chart Brazil to compare erect penis girth with largura nominal, convert centimetres and inches into millimetres, and understand how Brazilian labels such as tradicional, regular, tamanho maior and XL relate to actual product width. Current local references include Jontex Lubrificado at 52.5 mm and several Blowtex products at 52 mm.
Find a broad width range from girth, interpret current Brazilian product references, compare two widths or check girth and condom length together.
Enter erect girth in centimetres, millimetres or inches and see the broad nominal-width starting range used on this site.
Select a current local product reference or a common comparison width and see how it sits on the chart.
Compare two nominal widths by exact millimetres instead of relying on “tradicional”, “maior” or “XL”.
Compare girth with condom width and erect length with product length in one result.
In Brazil, the technical term to look for is largura nominal. Brazilian regulation requires the nominal width to be stated in millimetres on the primary packaging of natural-rubber-latex male condoms. This makes the number on the pack more useful than marketing words such as tradicional, maior or XL.
| Erect Girth | Centimetres | Broad Nominal Width | Broad Fit Family |
|---|---|---|---|
| Below 110 mm | Below 11.0 cm | 47–49 mm | Very close / snug |
| 110–119.9 mm | 11.0–11.99 cm | 49–52 mm | Close fit |
| 120–129.9 mm | 12.0–12.99 cm | 52–56 mm | Regular / balanced |
| 130–139.9 mm | 13.0–13.99 cm | 56–60 mm | Large / wide |
| 140+ mm | 14.0+ cm | 60–64+ mm | XL / extra wide |
| Largura Nominal | Flat Width In Inches | Broad Category | Brazil Context |
|---|---|---|---|
| 47 mm | 1.850 in | Very close / snug | Specialist narrow fit |
| 49 mm | 1.929 in | Close | Narrower than common Brazilian traditional references |
| 52 mm | 2.047 in | Close-to-regular | Current Blowtex traditional, Zero and Elite reference |
| 52.5 mm | 2.067 in | Regular / close transition | Current Jontex Lubrificado reference |
| 54 mm | 2.126 in | Regular | Useful intermediate comparison |
| 56 mm | 2.205 in | Upper regular | Wide transition on this site |
| 57 mm | 2.244 in | Large / wide | Useful cross-brand comparison |
| 60 mm | 2.362 in | Large / XL transition | Wider-fit comparison |
| 64 mm | 2.520 in | Extra wide / XL | Specialist wide sizing |
Jontex is a major Brazilian condom brand and its current official FAQ gives a useful local size reference: Jontex Lubrificado is 52.5 mm wide.
Jontex also currently sells XL Lubrificado and XL Sensitive. Its official product pages describe those XL variants as wider than regular condoms, but the current pages do not publish the exact nominal-width number. This is an important example of why consumers should not invent an XL millimetre value from the label alone.
| Jontex Brazil Product | Published Width | Current Official Description |
|---|---|---|
| Jontex Lubrificado | 52.5 mm | Traditional lubricated condom |
| Jontex Sensitive | Not stated on current FAQ | Thinner than Jontex Lubrificado |
| Jontex XL Lubrificado | Exact mm not stated on current page | Wider than regular condoms |
| Jontex XL Sensitive | Exact mm not stated on current page | Wider and thinner than Jontex Lubrificado |
| Jontex Sensação Pele com Pele | Check current pack | Polyisoprene, without natural latex |
Blowtex publishes nominal width directly on several current Brazilian product pages. Blowtex Lubrificado, Blowtex Zero and Blowtex Elite are all listed at 52 mm nominal width.
That gives Brazil a clear mainstream 52 mm reference. Blowtex also states that its natural-latex products are tested and advises water-based lubricant rather than oil-based products that can damage latex.
| Blowtex Brazil Product | Nominal Width | Current Product Context |
|---|---|---|
| Blowtex Lubrificado | 52 mm | Traditional natural-latex condom |
| Blowtex Zero | 52 mm | Thinner natural-latex condom |
| Blowtex Elite | 52 mm | Traditional parallel-sided latex condom |
| Blowtex Menta | 52 mm | Flavoured/aromatic latex condom |
There is no single Brazilian law saying “standard condom = one exact width”. Current mainstream local examples sit around 52–52.5 mm: Blowtex traditional products publish 52 mm, while Jontex Lubrificado publishes 52.5 mm.
This makes roughly 52–53 mm a useful Brazilian mainstream reference, but it should not be treated as a universal fit for every person.
“XL” is a marketing category rather than a fixed Brazilian nominal-width standard. Jontex currently sells XL products and explicitly says they are wider than regular products, but its official current pages do not give the exact width in millimetres.
When comparing an XL product, read the physical pack for the declared largura nominal. Brazilian rules require the nominal width to be stated in millimetres on the primary packaging of regulated natural-latex male condoms.
52 mm equals about 2.047 inches measured flat. It is one of the strongest mainstream Brazil-specific references because several Blowtex products publish this exact nominal width.
On this site's broad girth guide, 52 mm sits near the close-to-regular transition and is especially relevant around 115–125 mm girth depending on material and preference.
52.5 mm equals about 2.067 inches measured flat. Jontex's official FAQ currently identifies Jontex Lubrificado as a 52.5 mm traditional lubricated condom.
The half-millimetre difference between 52 and 52.5 mm is small, so material, shape and lubrication may matter more than the numerical difference for many users.
54 mm is an intermediate regular-width comparison above the common 52–52.5 mm local references. It can be useful if a traditional Brazilian 52 mm product feels slightly close but a much wider XL product would be an unnecessary jump.
56 mm sits at the upper end of regular sizing on this site and near the transition toward large/wide condoms. A user who finds 52–52.5 mm clearly restrictive may reasonably compare 54 and 56 mm products from brands that publish those widths.
60 mm is a broad large/XL comparison width on this site. It is 8 mm wider than a 52 mm product, a large technical difference rather than a subtle adjustment.
Do not assume a Brazilian product labelled XL is automatically 60 mm unless the current manufacturer pack or official specification actually states that value.
This Brazil-specific figure places current Jontex and Blowtex reference widths on the broader snug-to-XL spectrum without inventing an exact Jontex XL width.
Measure while fully erect. Wrap a soft flexible tape around the thickest part of the shaft and record the full circumference. Keep the tape against the skin without pulling hard enough to compress tissue.
If you do not have a flexible tape, use a non-stretch string, mark the overlap and then measure the marked length with a ruler. Record the result in centimetres or millimetres before comparing a Brazilian product's largura nominal.
Largura nominal is the condom measured flat from one side to the other at the manufacturer's reference area. It is not penis circumference and it is not penis diameter.
Brazil's current RDC 554/2021 requires the declared nominal width to match the manufacturer's specification within a tolerance of ±2 mm when tested under the regulation.
| Erect Girth | Millimetres | Broad Width | Broad Fit |
|---|---|---|---|
| 10.0 cm | 100 mm | 47–49 mm | Snug |
| 11.0 cm | 110 mm | 49–52 mm | Close |
| 11.5 cm | 115 mm | 49–52 mm | Close |
| 12.0 cm | 120 mm | 52–56 mm | Regular boundary |
| 12.5 cm | 125 mm | 52–56 mm | Regular |
| 13.0 cm | 130 mm | 56–60 mm | Large boundary |
| 13.5 cm | 135 mm | 56–60 mm | Large / wide |
| 14.0 cm | 140 mm | 60–64+ mm | XL boundary |
| 15.0 cm | 150 mm | 60–64+ mm | Extra wide |
| Erect Girth | Millimetres | Broad Width | Broad Fit |
|---|---|---|---|
| 4.00 in | 101.60 mm | 47–49 mm | Snug |
| 4.25 in | 107.95 mm | 47–49 mm | Snug / close transition |
| 4.50 in | 114.30 mm | 49–52 mm | Close |
| 4.75 in | 120.65 mm | 52–56 mm | Regular |
| 5.00 in | 127.00 mm | 52–56 mm | Regular |
| 5.25 in | 133.35 mm | 56–60 mm | Large / wide |
| 5.50 in | 139.70 mm | 56–60 / compare 60+ | Wide / XL boundary |
| 5.75 in | 146.05 mm | 60–64+ mm | XL |
| 6.00 in | 152.40 mm | 60–64+ mm | Extra wide |
An 11 cm erect girth equals 110 mm and sits at the start of this site's 49–52 mm close-fit range. A 52 mm Blowtex product is therefore a useful upper-edge mainstream local reference.
A 12 cm girth equals 120 mm and sits at the transition into the 52–56 mm regular range. Brazil's current 52 and 52.5 mm traditional product references sit on the closer side of that band.
A 12.5 cm girth equals 125 mm. This is a regular-range measurement on the site-level chart. Starting around 52–54 mm and then comparing comfort and security is more useful than choosing by the word “tradicional” alone.
A 13 cm girth equals 130 mm and sits at the transition toward the 56–60 mm large/wide band. If 52–52.5 mm Brazilian traditional products feel clearly restrictive, wider measured products are a logical next comparison.
A 13.5 cm girth equals 135 mm and sits comfortably inside this site's 56–60 mm large/wide band. Look for a product whose physical Brazilian pack states a nominal width in that range instead of assuming every XL label is the same size.
A 14 cm girth equals 140 mm and sits at the start of this site's 60–64+ mm extra-wide territory. Wider specialist products may be more appropriate if a 56–60 mm condom still creates painful pressure.
Five inches equals 127 mm. The site's broad range is 52–56 mm, so Brazil's current 52 and 52.5 mm mainstream products provide useful closer-fit comparison points.
5.25 inches equals approximately 133.35 mm. That falls in the broad 56–60 mm large/wide band on this page. Compare products with published widths instead of relying on an XL title whose exact millimetres are not shown online.
Brazil provides a useful real-world comparison between two very close mainstream widths. Blowtex Lubrificado and several other Blowtex products currently publish 52 mm nominal width, while Jontex Lubrificado currently publishes 52.5 mm.
The technical difference is only 0.5 mm of flat width, or about 1 mm of simple flat perimeter. For many users, material, lubrication and shape will make a bigger practical difference than that half-millimetre. The two values should therefore be treated as neighbouring mainstream references rather than dramatically different sizes.
Moving from 52.5 to 56 mm adds 3.5 mm of flat width. That is a much more meaningful size change than moving between 52 and 52.5 mm.
If a traditional 52–52.5 mm Brazilian condom feels noticeably restrictive, a measured 54–56 mm product can be a controlled next comparison. If 52.5 mm already feels secure and comfortable, there is no reason to move wider merely because a package uses a larger-sounding label.
A move from 56 to 60 mm adds 4 mm of flat width, equivalent to about 8 mm more simple flat perimeter before stretching. This is a significant technical jump.
A user should therefore look for a real fit reason—such as painful pressure, strong constriction or difficulty unrolling—before moving from upper-regular into a 60 mm large/XL comparison.
A 4.5-inch girth equals about 114.3 mm. On this site's broad chart, that falls in the 49–52 mm close-fit range.
Current Blowtex 52 mm products sit near the upper edge of that broad band. Jontex Lubrificado at 52.5 mm is slightly wider and may feel more regular depending on the user's preference and the product's elasticity.
4.75 inches equals about 120.65 mm and sits just inside this site's broad 52–56 mm regular range. Brazilian 52 and 52.5 mm mainstream references therefore provide logical closer-fit starting points at this boundary.
Someone who prefers more room may compare 54–56 mm products, while someone who values closer base security may stay nearer 52–52.5 mm.
A 5.5-inch girth equals about 139.7 mm, nearly the site's 140 mm transition into 60–64+ mm extra-wide territory.
At this boundary, a 56–60 mm large product and a specialist 60+ mm option can both be relevant comparisons. The exact Brazilian pack should be checked for largura nominal rather than assuming all XL-labelled products use one width.
The current Jontex XL Lubrificado and XL Sensitive pages clearly state that these products are wider than regular Jontex condoms. However, the current official pages reviewed for this guide do not state the actual nominal width in millimetres.
Assigning a number such as 56, 57 or 60 mm without official support would turn a useful size chart into guesswork. The correct approach is to read the physical Brazilian pack, where largura nominal should be declared under the applicable labelling rules.
Brazil's current natural-latex condom regulation does more than require a number on the label. It also defines how nominal width is tested. The width is measured at the narrowest point within 35 mm of the open end, or at another manufacturer-indicated narrowest point within that zone.
The declared nominal width must match the manufacturer's specification within a testing tolerance of ±2 mm. That tolerance is a conformity-testing rule, not a suggestion that consumers should casually interchange products that differ by 4 mm.
RDC 554/2021 states that tested natural-rubber-latex male condoms must not be shorter than 160 mm. This minimum helps define an acceptable regulated product, but it does not tell an individual which length is most comfortable.
Someone with a longer erect penis may need a product well above 160 mm. Someone with a shorter penis may find a 180–200 mm product creates extra rolled material even when the width is correct. Width and length still need to be considered separately.
The strongest shopping habit is to read the technical pack rather than only the front-of-box marketing. For natural-latex condoms regulated under RDC 554/2021, the packaging framework includes traceability and product information that helps users make a more informed choice.
| Pack Detail | Why It Matters |
|---|---|
| Largura nominal, em mm | Lets you compare actual condom width across brands. |
| Lote | Supports product traceability. |
| Fabricação / validade | Do not use expired products. |
| Fabricante / origem | Identifies who made the product. |
| Registro sanitário | Connects the product to the Brazilian sanitary-regulatory route. |
| Material / natural latex warning | Important for users with latex sensitivity. |
| Instruções de uso | Correct application is essential regardless of size. |
Brazilian consumers commonly use both camisinha and preservativo. Product pages and regulations typically use preservativo, while everyday shopping searches frequently use camisinha.
For sizing, the phrase that matters technically is largura nominal. “Tamanho tradicional”, “maior” and “XL” are useful shopping descriptions but can hide different technical widths between brands.
Yes. “Traditional” is not a single regulatory width category. Blowtex's traditional Lubrificado is currently 52 mm, while Jontex's traditional Lubrificado is currently 52.5 mm.
A half-millimetre difference is small, but it proves the broader point: compare the printed nominal width rather than assuming all products with the same marketing label are identical.
Yes. XL is only useful if the actual product width matches the wearer. If an XL-labelled product has a base that remains too narrow for the user's girth, the label itself cannot solve the fit problem.
Likewise, an unnecessarily wide XL condom can slip on someone who fits a 52–54 mm product securely. The goal is the right measured fit, not the biggest category name.
Yes. A mainstream 52–52.5 mm condom can still be too loose for someone with smaller girth. Repeated slipping, coming off or obvious excess movement are reasons to compare narrower specialist widths.
Smaller-width options may be less visible in supermarkets, but the technical principle is the same: choose by fit and nominal width rather than assuming mainstream standard products fit everyone.
Anvisa's current RDC 554/2021 sets detailed requirements for natural-rubber-latex male condoms, including dimensions, expiry, packaging and labelling. The primary pack must identify the product and brand, lot, manufacturing and expiry information, manufacturer origin, nominal width in millimetres and sanitary registration information.
This makes the package a technical source, not just branding.
Under RDC 554/2021, tested natural-rubber-latex male condoms must not be shorter than 160 mm. This is a regulatory minimum, not a statement that every 160 mm condom will suit every penis length.
Width and length should still be checked separately for personal fit.
Anvisa regulates male condoms as health products and sets minimum technical requirements. Natural-rubber-latex male condoms must also meet conformity-certification requirements within Brazil's conformity-assessment system.
Inmetro currently clarifies that compulsory certification applies to natural-rubber-latex male condoms, while polyisoprene male condoms are exempt from that specific compulsory Inmetro certification requirement and remain subject to Anvisa product-registration rules.
Painful constriction, numbness, strong pressure or major difficulty unrolling the condom despite correct orientation can indicate that the width is too narrow.
If a 52–52.5 mm traditional product creates those signs, compare a wider published nominal width rather than trying to tolerate the pressure.
Repeated slipping, coming off or obvious looseness can indicate that the base width is too large. If a wider condom slips, compare a narrower nominal width after confirming correct application.
Most current Jontex and Blowtex examples referenced on this page use natural-rubber latex. Jontex also offers Sensação Pele com Pele in polyisoprene.
Material can change stretch and feel, so an identical nominal-width number does not guarantee an identical sensation after changing materials.
Blowtex's current product guidance warns against oil-based products such as mineral oil, creams or petroleum jelly with its natural-latex condoms and recommends water-based lubricant when additional lubrication is desired.
Always follow the exact package guidance because lubricant compatibility can differ by condom material.
| Your Situation | What To Compare | Brazil Context |
|---|---|---|
| 52 mm feels secure and comfortable | Stay near 52–52.5 mm | Blowtex / Jontex mainstream references |
| 52 mm feels slightly tight | Compare 54 mm | Small controlled step up |
| 52–52.5 mm clearly restrictive | Compare 56+ mm | Look for published nominal width |
| Wide condom slips | Move down in base width | Do not assume XL is automatically better |
| Width fits but product is short | Longer product at similar width | Length and width are separate |
| XL label has no online mm value | Check physical pack | Look for “largura nominal” |
Use a new condom for every sexual act and open the wrapper only when you are ready to use it. Do not use sharp objects to open the pack.
Put the condom on the erect penis before genital contact, pinch air from the reservoir tip, unroll it to the base and hold the rim during withdrawal after ejaculation. Discard after a single use.
Common questions about Brazilian condom sizes, largura nominal, Jontex, Blowtex, XL condoms and Anvisa/Inmetro requirements.