Penis Girth • Inches / CM / MM • Nominal Width Range
Use erect penis girth as the starting body measurement for condom sizing. Enter your circumference in inches, centimetres or millimetres, compare a broad nominal-width range, see where close, regular, wide and XL options sit, and download a PDF result.
Start with circumference, compare nearby nominal widths, explore a chart boundary or check a specific product width.
Enter erect girth and see the broad starting nominal-width range used by this site.
See whether your girth is close to a broad size-band boundary and which neighbouring widths are worth comparing.
Enter two product widths and compare both with your measured girth.
Check one product's nominal width against your girth-based starting range.
The chart below uses erect penis girth as the body measurement and compares it with broad condom nominal-width ranges. The girth conversion is exact. The width range is only a practical starting comparison and should not be treated as a universal manufacturer standard.
| Erect Girth | Approx. Inches | Broad Nominal Width | Broad Size Family |
|---|---|---|---|
| Below 110 mm | Below 4.33 in | 47–49 mm | Very close / snug |
| 110–119.9 mm | 4.33–4.72 in | 49–52 mm | Close fit |
| 120–129.9 mm | 4.72–5.11 in | 52–56 mm | Regular / balanced |
| 130–139.9 mm | 5.12–5.51 in | 56–60 mm | Wide fit |
| 140+ mm | 5.51+ in | 60+ mm | Extra wide / XL |
| Girth (in) | Girth (mm) | Broad Starting Width | Comparison |
|---|---|---|---|
| 4.25 in | 107.95 mm | 47–49 mm | Very close / snug |
| 4.50 in | 114.30 mm | 49–52 mm | Close |
| 4.75 in | 120.65 mm | 52–56 mm | Regular / balanced |
| 5.00 in | 127.00 mm | 52–56 mm | Regular / balanced |
| 5.25 in | 133.35 mm | 56–60 mm | Wide |
| 5.50 in | 139.70 mm | 56–60 mm | Wide |
| 5.75 in | 146.05 mm | 60+ mm | Extra wide / XL |
| Girth (cm) | Girth (mm) | Broad Starting Width | Comparison |
|---|---|---|---|
| 10.5 cm | 105 mm | 47–49 mm | Very close / snug |
| 11.0 cm | 110 mm | 49–52 mm | Close-fit boundary |
| 11.5 cm | 115 mm | 49–52 mm | Close fit |
| 12.0 cm | 120 mm | 52–56 mm | Regular boundary |
| 12.5 cm | 125 mm | 52–56 mm | Regular / balanced |
| 13.0 cm | 130 mm | 56–60 mm | Wide boundary |
| 14.0 cm | 140 mm | 60+ mm | XL boundary |
Girth captures the full circumference around the shaft. Diameter is only the straight-line distance across the shaft and can be misread if the body is not perfectly circular. For practical condom sizing, circumference provides a more useful body-fit reference.
This figure moves from smaller to larger body circumference and shows the broad nominal-width bands used by this site.
A 60 mm condom is 2 mm narrower than a true 62 mm condom. This is a small and controlled width change, which makes 60 and 62 mm logical comparison points when you are fine-tuning a wide fit.
If 62 mm repeatedly slips despite correct application, 60 mm may provide a closer base fit. If 60 mm feels overly tight, 62 mm may add useful room without jumping directly to 64 or 69 mm.
A 64 mm condom is 2 mm wider than 62 mm. This is another controlled step and is particularly useful at the wide-to-XL transition. If 62 mm feels secure but slightly restrictive, 64 mm is a natural nearby width to compare.
If a 64 mm condom feels slightly too roomy, a true 62 mm product can provide a middle point between 60 and 64 mm.
A 69 mm condom is 7 mm wider than 62 mm. That is a substantial nominal-width increase and should not be treated as a small adjustment. If you only need slightly more room than 62 mm, 64 mm is a more controlled next comparison.
A 72 mm condom is 10 mm wider than 62 mm. The difference is large enough that these products can serve very different fit needs. Use a manufacturer-specific sizing system before moving across such a large width gap.
There is no universal marketing label. Current specialist guidance commonly places 55–60 mm in large sizing and 64–72 mm in XL sizing, which makes 62 mm a natural transition width between the two.
Some retailers may call a 62 mm product XL, while another brand may use a shape-based large or magnum label. Always compare the actual width and where that width is measured.
This distinction is one of the most important parts of the page. A true 62 mm nominal-width product has a 62 mm flat-width specification at the manufacturer's nominal reference section. A flared condom may instead have a 52–57 mm base or middle and reach 62 mm only toward the head.
Those products can feel very different. A narrower base can provide more grip while a 62 mm head provides extra room. A straight 62 mm condom provides more width through a larger portion of the product.
Current web listings show several useful examples. Lovex Air Thin is currently listed by a condom wholesaler with 62 mm nominal width, 180 mm length and 0.045 mm latex thickness. Trojan UK's current Magnum Ribbed chart lists 55 mm base flat width and 62 mm mid-body flat width. Pasante Ribbed & Dotted is currently listed by Lovehoney at 52 mm nominal width and 62 mm at the end.
These examples demonstrate why “62 mm condom” can refer to different fit architectures. Read the exact product specification before deciding whether two products are genuinely comparable.
Measure while fully erect. Wrap a flexible tape around the fullest part of the shaft and keep it snug without compressing tissue. If you do not have a soft tape, use non-stretch string, mark the overlap point and measure it against a ruler.
Repeat the measurement once if possible. If your product is flared, also read the manufacturer's advice about where the condom is narrowest, because the base fit may matter more for security than the maximum head width.
Painful pressure, strong constriction, numbness or major difficulty unrolling despite correct orientation are reasons to compare a wider product such as 64 mm or another manufacturer-recommended XL size.
If the condom is flared to 62 mm but has a 55 mm base, the tightness may come from the base rather than the 62 mm body section. Read the shape dimensions before assuming you need a much wider maximum width.
Repeated slipping, coming off or substantial bunching can be reasons to compare a narrower 60 mm product or a shaped condom with a more secure base, after checking correct application.
A flared condom can sometimes offer a compromise: more room through the body but a narrower base. Whether that works depends on your measurements and the exact design.
A suitable fit should roll on according to the instructions, remain secure during use and feel comfortable without painful pressure. It should not repeatedly bunch, slide or cause obvious constriction.
Width does not tell you length. A 62 mm nominal-width condom can be short, average or long depending on the product. Lovex Air Thin is currently listed at 180 mm length, while shaped products that reach 62 mm may have completely different lengths.
Always check product length separately when it is published.
The 62 mm number is a flat-width measurement regardless of material, but latex, polyisoprene, polyurethane and other materials can stretch and feel differently. Do not assume identical comfort simply because two products share the same nominal width.
Use this page when your main question is what 62 mm means and whether it is a true nominal width or part of a flared shape. For broader sizing and measurement workflows, use the related tools below.
Correct width does not replace correct use. NHS guidance advises using a new condom every time, following packet instructions, checking the use-by date and avoiding oil-based lubricant with latex condoms. Correct application includes squeezing air from the tip, rolling the condom all the way down and holding the base during withdrawal.
If a condom repeatedly slips, feels painfully tight, breaks or does not unroll correctly, reassess both application and fit rather than focusing only on the largest width number printed on a product page.
A 57 mm condom is 5 mm narrower than a true 62 mm nominal-width condom. That difference is large enough to move from a mainstream wide product toward the low end of extra-wide sizing. If a 57 mm condom is only slightly restrictive, jumping directly to 62 mm may add more room than necessary; a 60 mm width can provide a smaller intermediate step.
On the other hand, if 57 mm is clearly too tight throughout the shaft and a 60 mm product still feels close, 62 mm becomes a logical width to compare. Keep product shape in mind: a 57 mm base that flares wider can feel different from a straight 57 mm condom, just as a shaped 62 mm product can differ from a true 62 mm nominal-width design.
Many common nominal-width directories move from 60 mm directly to 64 mm, so 62 mm is not always presented as a standard category. That does not make 62 mm meaningless. It simply means availability depends more heavily on brand, market and product design. For someone who finds 60 mm too close and 64 mm too loose, a true 62 mm product can provide a useful middle point.
The same number can also appear as part of a flared shape rather than the main nominal width. That is why this page puts unusual emphasis on reading technical specifications. When the packet or product page shows more than one width, identify which width is at the base, which is through the body and which is near the head.
Start with the words used by the manufacturer. Look for nominal width, base flat width, mid-body width, head width, length, shape and material. A single product may list several of these. Do not assume the largest width is the nominal width.
A straight 62 mm product generally provides more consistent width through the shaft. A flared product can use a narrower base for security while offering more room through the body or head. Neither shape is automatically better. The useful choice depends on where your current condom feels too tight or too loose.
If most discomfort is around the base, a flared condom with a 55 mm base and 62 mm body may not solve the problem even though the maximum width sounds large. If the base already feels secure but more headroom is needed, the flared design may be useful. This is exactly why nominal width and maximum width should not be treated as interchangeable numbers.
The difference between 60 mm, 62 mm and 64 mm looks small when written as a number, but each value describes the condom laid flat. A 2 mm increase exists across the width of the product and can change how much stretch is required when worn. For someone already close to the edge of a comfortable fit, that small numerical change can be useful.
This does not mean every 2 mm change will feel dramatic. Material, lubrication, contour, thickness and individual anatomy all affect perception. The advantage of moving in 2 mm steps is that it lets you make a controlled comparison rather than changing several variables at once.
If a true 62 mm condom feels too tight, first make sure it is oriented correctly and fully unrolled. Then compare whether the pressure is concentrated at the base, middle or head. If pressure is mainly at the base, a wider base or different contour may matter more than maximum width. If the whole shaft feels restricted, a 64 mm or other wider nominal-width product may be a better comparison.
If a 62 mm condom repeatedly slips, inspect whether the base is also 62 mm or whether the product has a narrower secure base. A straight 62 mm product may be roomier at the base than a flared design. If correct application does not solve repeated slipping, compare a 60 mm product or a shaped option with a smaller base.
Lubricant can improve comfort, but it does not turn the wrong size into the right size. A condom that is painfully tight should not be “fixed” simply by adding more lubricant, and a condom that repeatedly slips should not be kept solely because lubrication makes it feel better. Use lubricant together with correct sizing and correct application.
For latex condoms, NHS guidance advises avoiding oil-based lubricants and using water-based or silicone-based options instead. Always check the compatibility instructions for the exact condom material you are using.
Even a correctly sized condom can be compromised by poor storage or damaged packaging. Check the use-by date, make sure the wrapper is intact and follow the storage directions on the package. Avoid using a condom that is expired or visibly damaged.
Size comparison should therefore be only one part of your checklist. Product condition, correct application, material compatibility and safe storage remain important every time a condom is used.
The most important lesson from current 62 mm examples is that marketing shorthand can hide product shape. Trojan Magnum Ribbed reaches 62 mm through the mid-body but is narrower at the base, while Pasante Ribbed & Dotted reaches 62 mm at the end but has a smaller nominal width. A shopper who reads only “62 mm” could incorrectly expect both to behave like a straight 62 mm nominal-width condom.
Before buying, look for a diagram or technical table. If multiple widths are listed, record all of them. This makes later comparisons far more useful and prevents an apparent “same size” purchase from feeling completely different.
52 mm can sit at the lower edge of a medium / regular range. It also overlaps with close-fit sizing, which is why one manufacturer may describe a nearby width as close while another calls it standard or regular. The actual millimetre number is the more useful comparison.
If 52 mm feels secure but a little restrictive, 54 mm is a controlled step up. If 52 mm feels too roomy, a 49 mm product can be a logical step down.
54 mm is used on this page as a practical centre reference for medium / regular sizing. It sits between 52 mm and 56 mm and is useful when comparing whether you want a slightly closer or slightly roomier fit.
If 54 mm feels secure but slightly restrictive, compare 56 mm. If it feels slightly loose, compare 52 mm.
56 mm sits around the upper edge of this site's broad medium zone and lower edge of wide sizing. Some brands may still call it regular; others may position nearby widths as large or wide.
A 56 mm product is 4 mm wider than 52 mm, so even though both can sit near the broad regular family, they may feel noticeably different.
Snug or close-fit condoms are usually narrower than the broad medium zone. On this site, approximately 47–52 mm covers close / snug comparison territory, while 52–56 mm covers the medium / regular zone.
If a medium condom repeatedly slips despite correct application, moving slightly narrower can be a logical comparison. If a snug condom feels painfully tight, moving toward 52–54 mm may add useful room.
Wide condoms generally begin above the upper edge of the medium zone. On this site, 56–60 mm is treated as wide comparison territory. A 60 mm product is 6 mm wider than a 54 mm centre reference, which is a substantial change rather than a tiny adjustment.
If 56 mm is slightly tight, 60 mm may be worth comparing. If 60 mm is too roomy, 56 mm provides a smaller step down than jumping directly to 52 mm.
Measure while fully erect. Wrap a soft measuring tape around the fullest part of the shaft and keep it snug without compressing tissue. If you do not have a flexible tape, use non-stretch string, mark the overlap point and measure it against a ruler.
Repeat once if possible and record the unit. Then compare your girth with the product's actual nominal width rather than assuming the word “medium” alone is enough.
Painful pressure, strong constriction, numbness or major difficulty unrolling despite correct orientation can be reasons to compare a wider product. If 52 mm feels too close, 54 or 56 mm can be logical nearby steps.
A secure fit should not require painful compression. If application is correct but a product consistently feels restrictive, compare a slightly wider nominal width or a different shape.
Repeated slipping, coming off or substantial bunching can be reasons to compare a narrower nominal width, after checking correct application. If 56 mm feels too roomy, 54 or 52 mm can provide a controlled step down.
Fit is not the only cause of slipping, so consider application, erection and product shape as well.
A suitable fit should roll on according to the instructions, remain secure during use and feel comfortable without painful pressure. It should not repeatedly slide, bunch or create major constriction.
“Medium”, “regular” and “standard” are marketing categories rather than universal technical units. One manufacturer may use 52–53 mm for a close or standard product, while another may use 54–56 mm for its regular line.
This is why nominal width is the better comparison point. If you know a condom that fits well, note its millimetre width and compare that number when changing brands.
Two condoms with the same nominal width can still feel different because of shape. A straight 54 mm condom and a contoured 54 mm condom may distribute space differently around the head and shaft.
If the width looks correct but the fit feels wrong, another shape at the same or nearby width can be worth comparing.
Nominal width remains a flat product measurement regardless of material, but latex, polyisoprene and other materials can stretch and feel differently. When switching material, compare the actual product width again instead of assuming every medium condom will feel identical.
A medium nominal width does not imply a standard product length. Two 54 mm condoms can have different lengths, shapes and headroom. Check the manufacturer's length specification separately when it is available.
Use this page when your main question is where medium or regular width sits. For broader sizing, nominal-width detail or girth-first sizing, use the related tools below.
Choosing a suitable width does not replace correct use. Check the wrapper and expiry date, use a new condom each time, follow the product instructions and use a lubricant that is compatible with the condom material.
If a condom repeatedly slips, feels painfully tight, breaks or does not unroll correctly, reassess both application and fit rather than changing width blindly.
Measure while fully erect. Wrap a soft measuring tape around the fullest part of the shaft and keep it snug without pressing deeply into the tissue. If you do not have a flexible tape, use non-stretch string, mark the overlap point and measure the string against a ruler.
Record the number and the unit immediately. Repeat once if possible. A slightly different tape position or excessive tension can change the reading, so consistency matters more than trying to force a “perfect” number.
Measure from the base of the erect penis to the tip along the top side. Keep the ruler or tape aligned with the shaft and avoid curving it around the body. Record length separately from girth because the two measurements answer different sizing questions.
Condom product length should also be checked separately when the manufacturer publishes it. A suitable nominal width does not guarantee that two products have the same length.
Nominal width is usually stated in millimetres and refers to the condom measured flat. If a product says 54 mm nominal width, that is approximately 2.126 inches across when flat. It is not 54 mm of body circumference.
When comparing brands, nominal width is normally more useful than labels such as regular, large or XL because marketing categories vary.
Tightness and looseness are primarily felt around the circumference of the shaft, so girth is usually the most useful body measurement for choosing a starting width. Length still matters for coverage and unrolling, but it should be checked as a separate dimension.
If you measure in inches, convert girth and length by multiplying by 25.4 to get millimetres. Five inches of girth equals 127 mm, while 6.5 inches of length equals 165.1 mm. Keep the measurement type attached to the number so you do not accidentally compare a body circumference with a flat product width.
To convert centimetres to millimetres, multiply by 10. A 12.5 cm girth equals 125 mm. A 17 cm body length equals 170 mm. This conversion is exact and does not change what the measurement represents.
First convert your girth to a consistent unit, ideally millimetres. Then use a broad girth-to-width range only as a starting point. Next, check the exact nominal width and product length published by the manufacturer. Finally, confirm how the condom actually rolls on, stays secure and feels.
Do not treat chart boundaries as hard cut-offs. A measurement close to a boundary can reasonably justify comparing nearby widths from both sides. Tape tension, body variation and product shape can all make small numerical differences less important than the chart suggests.
The physical unit conversion does not change with material, but perceived fit can. Latex and latex-free products can stretch differently, and shape or thickness can affect how a given width feels. Recheck the exact product dimensions whenever you change material or product line.
Yes. Some condoms are straight while others taper or flare. A product can have one base width and a wider body or head section. When a manufacturer publishes more than one width, use the full shape information instead of assuming the maximum width is the nominal width.
Use a soft, non-stretch tape; measure the fullest part of the shaft for girth; repeat the measurement; record the unit; avoid pulling the tape excessively tight; and keep body measurements separate from product dimensions. If results vary slightly, use the repeated readings as a range rather than treating one decimal place as absolute.
A chart is best for scanning many values at once. A calculator is better when you want an immediate conversion from one exact measurement. A fit calculator is useful when you already know both your girth and the nominal width of a specific condom.
Measurement is only one part of condom use. Current NHS guidance advises using a new condom every time, checking the use-by date, following the packet instructions, not using more than one condom at once, and avoiding oil-based lubricant with latex condoms.
CDC guidance also advises carefully opening the wrapper, placing the condom on the erect penis, pinching air from the tip, unrolling it fully, holding the base during withdrawal, not reusing condoms, and avoiding oil-based products with latex condoms.
Penis girth is the full circumference around the erect shaft. Nominal width is the width of the condom laid flat. A 125 mm girth and a 54 mm condom are therefore not two versions of the same measurement.
Girth is useful for choosing which width range to compare. Nominal width is useful for comparing products inside that range.
On this site's broad comparison guide, girths below about 110 mm are compared with 47–49 mm widths; 110–120 mm with 49–52 mm; 120–130 mm with 52–56 mm; 130–140 mm with 56–60 mm; and 140+ mm with 60 mm and above.
These are broad starting bands. They are not official universal sizing standards and should not override the chart for the exact condom you plan to use.
External condoms are elastic. They need enough tension to stay in place while still being comfortable and easy to apply correctly. An unstretched product circumference that exactly matched body girth could behave differently from a product designed to stretch securely.
This is why product width is intentionally interpreted through material stretch and manufacturer fit guidance rather than by matching two circumferences exactly.
Two 54 mm condoms can share the same nominal width but still feel different if their materials, thicknesses or elastic properties differ. Latex, synthetic rubber and other condom materials do not necessarily produce identical perceived tension.
When switching product line or material, use nominal width as a comparison anchor but still reassess real fit.
Some condoms are straight-sided. Others taper, flare or provide extra headroom. A shaped condom can have a narrower base and a wider body or head. If a product page publishes multiple width measurements, do not assume the maximum width is the nominal base width.
Four millimetres sounds small on a ruler, but it is a repeated width difference through much of the product. Moving from 52 mm to 56 mm increases the simple flattened perimeter by about 8 mm before stretching. That change can be meaningful for users who are close to a fit boundary.
Terms such as regular, standard, large and XL are not precise technical units. A brand can call one width regular while another positions a nearby width as close fit or large.
The millimetre number lets you compare products directly. If a 54 mm product fits well, remembering “54 mm” is usually more useful than remembering only that the packet said “regular”.
Look for nominal width first. Then check product length, material, shape and any manufacturer fit chart. If the page gives base width and head width separately, record both. Avoid relying on a marketing size label when the technical dimensions are available.
Painful pressure, major constriction, numbness or substantial difficulty unrolling the condom despite correct orientation can be reasons to compare a wider nominal width or different shape. The target is secure, not painfully tight.
Repeated slipping, coming off or excessive bunching can be reasons to compare a narrower width after checking correct application. Shape, erection and lubricant can also affect how securely a condom stays in place.
Measure erect girth. Convert it to millimetres. Use a broad width band to identify nearby products. Read the exact nominal width of those products. Compare shape, length and material. Then confirm the condom rolls on correctly, stays secure and feels comfortable.
| Measurement | Where It Comes From | What It Tells You | Do Not Confuse It With |
|---|---|---|---|
| Penis Girth | Body | Circumference around shaft | Nominal width |
| Penis Length | Body | Base-to-tip length | Product width |
| Nominal Width | Condom | Flat product width | Body circumference |
| Condom Length | Condom | Product length | Nominal width |
Width choice does not replace correct use. Current NHS guidance says to use a new condom every time, follow packet instructions, check the use-by date, avoid using more than one condom at once, and avoid oil-based lubricant with latex condoms.
CDC guidance also advises opening the wrapper carefully, pinching air from the tip, unrolling the condom fully, holding the base during withdrawal, not reusing condoms and avoiding oil-based products with latex condoms.
Measure while fully erect. Wrap a soft, flexible tape around the fullest part of the shaft. The tape should follow the body closely but should not dig into or compress the tissue.
If you do not have a flexible measuring tape, use a non-stretch string. Wrap the string around the shaft, mark where it overlaps, then place it against a ruler. Record the number and the unit immediately.
Condom width affects how tightly the product sits around the shaft, so circumference is a useful starting measurement. Length still matters for coverage, but width and girth are more directly connected to whether a condom feels too tight or too loose.
4.25 inches converts to about 107.95 mm of girth. On this site, that sits in the very-close comparison zone with a broad starting nominal width of roughly 47–49 mm.
4.5 inches equals 114.3 mm. That falls inside the site's 110–120 mm girth band, which is compared with approximately 49–52 mm nominal widths.
4.75 inches equals about 120.65 mm. This is just above the 120 mm boundary, so the broad starting comparison moves into approximately 52–56 mm. Because the measurement is close to a boundary, comparing both 52 mm and nearby lower widths can still be sensible.
5 inches equals exactly 127 mm. On this site's broad guide, that sits inside the 120–130 mm girth band and compares with roughly 52–56 mm nominal width. A product around 54 mm can therefore serve as a useful centre reference, but manufacturer sizing can differ.
5.25 inches equals about 133.35 mm. That sits in the 130–140 mm girth band, which this site compares with approximately 56–60 mm nominal widths.
5.5 inches equals about 139.7 mm. This is very close to the 140 mm boundary. Instead of treating one side as automatically correct, compare 56–60 mm and nearby 60+ mm options according to the specific manufacturer's chart.
5.75 inches equals about 146.05 mm. On this site, that sits in extra-wide / XL comparison territory, starting around 60 mm and above. Wider sizes such as 60, 62, 64 or larger may be relevant depending on the product line.
A chart boundary is not a biological line. If you measure exactly 120, 130 or 140 mm, compare nearby widths from both bands. Tape tension, repeat measurements, product shape and material can all matter more than a tiny numerical difference.
Repeating the measurement can reveal differences caused by tape position, erection firmness or how tightly the tape was held. If repeated readings are slightly different, keep the range rather than forcing one decimal place to act as an absolute truth.
Girth is the full distance around the erect shaft. Nominal width is the condom laid flat. A 125 mm girth does not “equal” a 52, 54 or 56 mm width. Instead, the body girth is used to identify which elastic product widths are worth comparing.
Dividing body girth by two describes a simple geometric relationship for a flat, unstretched tube. It does not account for the stretch required for a condom to stay secure, or for differences in material, shape and construction.
Use girth-to-width tables as practical starting ranges, not exact equations.
Two people with a similar girth can prefer slightly different nearby widths. One may prefer the lower edge of a broad range for a closer feel; another may prefer the upper edge for more room. Comfort and security both matter.
Painful pressure, strong constriction, numbness or major difficulty unrolling despite correct orientation can be reasons to compare a wider nominal width or a different product shape.
Repeated slipping, coming off or substantial bunching can be reasons to compare a narrower width after checking correct application. Fit is not the only possible cause of slipping, so product shape, erection and lubricant can also matter.
The girth measurement itself does not change with material, but the way a condom stretches can. Latex and latex-free materials can feel different at the same nominal width. Recheck the manufacturer's sizing whenever you change product line or material.
Straight, tapered and flared condoms can distribute width differently. A product may have a secure narrower base with more room at the head. If a condom publishes multiple width measurements, do not compare its widest point as if it were the base nominal width.
Girth is generally more useful for selecting a starting condom width. Length is still important, but it should be compared with the product's length separately. A condom can have a suitable width and a very different product length from another condom.
Current NHS guidance says to use a new condom every time, follow the instructions on the packet, check the use-by date, avoid using more than one condom at once, and avoid oil-based lubricant with latex condoms.
CDC guidance advises carefully opening the wrapper, placing the condom on the erect penis, pinching air out of the tip, unrolling it fully, holding the base during withdrawal, not reusing condoms, and avoiding oil-based products with latex condoms.
Common questions about penis girth, nominal width, inches-to-mm conversion, size boundaries and how to choose a starting condom width.