Durex • SKYN • Trojan • ONE • LELO • Pasante
Compare condom brand sizes by nominal width instead of relying only on words such as regular, large or XL. Use the tools below to compare representative current products from major brands, convert widths and understand why one brand's “regular” may not match another brand's dimensions.
Representative products checked against official manufacturer pages in August 2026. Product ranges can change, so verify the exact pack before buying.
Find products near a width, compare two models, convert nominal width and keep body girth separate from product dimensions.
Enter a nominal width to find the closest representative products in this comparison set.
Enter the flat product width in millimetres.
Compare nominal width, material and published fit label without assuming the labels are equivalent.
Convert a published condom width between millimetres, centimetres and inches.
Keep your body circumference and the condom's flat nominal width as separate measurements.
Circumference around the fullest part.
The chart below compares representative current products from several major condom brands. The most useful column is nominal width, the width of the condom measured flat. Brand marketing terms such as close, regular, large, king and XL are included only as product labels; they are not a universal cross-brand sizing standard.
Always verify the exact product pack or manufacturer webpage because dimensions can differ within the same brand and product family. Durex is a good example: Thin Feel Regular is currently listed at 54 mm, while Durex Nude Regular is listed at 56 mm on Durex UK's range information.
| Product | Brand | Nominal Width | Width in Inches | Material | Published Fit Label | Source |
|---|---|---|---|---|---|---|
| Durex Thin Feel Close | Durex | 52.5 mm | 2.067 in | Latex | Close fit | Official source ↗ |
| Durex Thin Feel Regular | Durex | 54 mm | 2.126 in | Latex | Regular fit | Official source ↗ |
| Durex Nude Regular | Durex | 56 mm | 2.205 in | Latex | Regular fit | Official source ↗ |
| Durex Nude Wide | Durex | 60 mm | 2.362 in | Latex | Wide fit | Official source ↗ |
| SKYN Original | SKYN | 53 mm | 2.087 in | Polyisoprene | Standard | Official source ↗ |
| SKYN Elite | SKYN | 53 mm | 2.087 in | Polyisoprene | Standard | Official source ↗ |
| SKYN Large | SKYN | 56 mm | 2.205 in | Polyisoprene | Large | Official source ↗ |
| Trojan Magnum Original | Trojan | 55 mm | 2.165 in | Latex | Large / tapered | Official source ↗ |
| Trojan Magnum Raw | Trojan | 57 mm | 2.244 in | Latex | Large / tapered | Official source ↗ |
| Trojan Magnum XL | Trojan | 58 mm | 2.283 in | Latex | XL / tapered | Official source ↗ |
| ONE Vanish Hyperthin | ONE | 53 mm | 2.087 in | Latex | Standard | Official source ↗ |
| ONE Flex | ONE | 54 mm | 2.126 in | Latex | Standard | Official source ↗ |
| MyONE Custom Fit | MyONE | 45 mm | 1.772 in | Latex | Custom range starts at 45mm | Official source ↗ |
| MyONE Custom Fit Wide | MyONE | 64 mm | 2.520 in | Latex | Custom range up to 64mm | Official source ↗ |
| LELO HEX Original | LELO | 54 mm | 2.126 in | Latex | Original | Official source ↗ |
| LELO HEX Respect XL | LELO | 58 mm | 2.283 in | Latex | XL | Official source ↗ |
| Pasante Regular | Pasante | 54 mm | 2.126 in | Latex | Regular | Official source ↗ |
| Pasante King Size | Pasante | 60 mm | 2.362 in | Latex | King / larger fit | Official source ↗ |
Durex Thin Feel Close is currently published at 52.5 mm nominal width.
SKYN Original, SKYN Elite and several ONE standard products use 53 mm.
Durex Thin Feel Regular, ONE Flex, LELO HEX Original and Pasante Regular are current 54 mm examples.
Durex Nude Wide and Pasante King Size are current 60 mm examples.
Condom packaging often uses familiar words such as regular, large, wide, close or XL. Those words help shoppers navigate a brand's own range, but they do not guarantee identical dimensions across different brands—or even across every range made by one brand.
A 54 mm product and a 56 mm product may both be marketed as regular in different contexts. Likewise, a product described as large may be wider at the mid-shaft while keeping a narrower base. Trojan's Magnum chart is a useful example because it publishes both base flat width and mid-shaft flat width for several contoured models. That means a single label or one number does not capture the whole shape.
For practical comparison, start with the published nominal or base flat width, then look at length, contour, material and your experience using the product. This avoids the common mistake of assuming that moving from one brand's “regular” to another brand's “regular” means no size change.
Durex UK currently demonstrates why brand-level generalisations can be misleading. The Thin Feel Close product is published at 52.5 mm, while Thin Feel Regular is published at 54 mm. Durex's Nude range information lists close at 52.5 mm, regular at 56 mm and wide at 60 mm. The useful lesson is not that one number is “the Durex regular size”; it is that the exact model matters.
If you are switching between two Durex ranges, compare the specifications on the exact product page instead of assuming the fit label carries the same nominal width. A small millimetre difference may or may not feel important to a particular user because shape, elasticity and material also affect the experience.
SKYN's current global product pages list SKYN Original at 53 mm nominal width, and SKYN Elite is also listed at 53 mm. SKYN Large is listed at 56 mm nominal width. This makes the SKYN range relatively straightforward for a basic width comparison: many standard-style SKYN variants share 53 mm, while Large moves to 56 mm.
SKYN uses synthetic polyisoprene rather than natural rubber latex. Material matters when comparing feel and allergy suitability, but material does not replace size checking. A user moving from a 53 mm latex product to a 53 mm polyisoprene product should still judge real-world fit, because materials and product construction can feel different even when the nominal width number matches.
Trojan's official Magnum size chart provides unusually useful shape detail. Current examples include Magnum Original at a 55 mm base flat width, Magnum Raw at 57 mm, and Magnum XL at 58 mm. The chart also publishes wider mid-shaft measurements for several models because many Magnum condoms are tapered or flared rather than straight-walled.
This matters when comparing Magnum products with brands that publish one straight nominal-width number. A 55 mm Magnum base does not mean the entire condom body is 55 mm wide. If you need a technically careful comparison, compare base width, mid-shaft width, length and shape—not just the largest number on a chart.
ONE's current size chart lists many standard ONE products at 53 mm, while ONE Flex is listed at 54 mm. MyONE Custom Fit goes much further: its FitCode system combines a width/girth number and a length letter, with current nominal-width options ranging from 45 mm to 64 mm across 52 size combinations.
This is fundamentally different from a simple small/regular/large system. If conventional products bunch, slip, feel too tight, or are consistently much longer than needed, a broader custom-width and length matrix gives more dimensions to compare. It still does not eliminate the need to test comfort and follow manufacturer instructions.
LELO currently publishes HEX Original at 54 mm and 180 mm length. HEX Respect XL is published at 58 mm and 195 mm length. That creates a clear four-millimetre step in nominal width between the two examples, alongside a longer XL product.
LELO also uses a distinct internal hexagonal structure, so users comparing it with a conventional smooth condom should consider construction as well as the width number. Width helps you compare scale; it does not make products with different designs identical.
Pasante's current UK product pages list its Regular condom at 54 mm nominal width and 190 mm nominal length. Pasante King Size is listed at 60 mm nominal width and 205 mm nominal length. These are useful reference points because they show a sizable width and length jump inside one brand.
If you are comparing Pasante King Size with another brand's “large” product, do not compare only the words. For example, 60 mm is wider than current SKYN Large at 56 mm and wider than the base width of several current Magnum products.
Looking across the representative products in this guide, several clusters appear. These clusters are comparison groups, not medical fit prescriptions:
| Nominal Width | Representative Current Examples | How To Read It |
|---|---|---|
| 45–51 mm | MyONE custom widths | Narrower custom options; verify the exact FitCode. |
| 52.5–54 mm | Durex Thin Feel Close/Regular, SKYN Original/Elite, ONE standard, LELO HEX Original, Pasante Regular | Many mainstream examples cluster here, despite different marketing labels. |
| 55–56 mm | Trojan Magnum Original base, SKYN Large, Durex Nude Regular | A modest step wider than many 53–54 mm products. |
| 57–58 mm | Trojan Magnum Raw, Magnum XL base, LELO HEX Respect XL | Wider examples; shape can change mid-shaft dimensions. |
| 60 mm | Durex Nude Wide, Pasante King Size, MyONE 60 width options | Clearly wider than many mainstream regular-width examples. |
| 64 mm | MyONE custom width options | Very wide custom end of the MyONE range. |
Measure erect circumference around the fullest part with a flexible tape or non-stretch string.
Find the exact model and its published nominal width, not just the brand name.
Use nominal width as the first cross-brand technical comparison.
Compare product length and whether it is straight, tapered or flared.
It should stay secure without painful pressure or repeated slipping.
Two products with the same nominal width are not automatically interchangeable. SKYN uses synthetic polyisoprene, while many Durex, Trojan, ONE, LELO and Pasante examples in this chart use natural rubber latex. Thickness, lubrication, wall design, reservoir shape and elasticity can all change the subjective feel.
If you have a known or suspected latex allergy, check the material on the current package and manufacturer page. Do not assume a brand is entirely latex or entirely latex-free based on one product.
If your current condom fits well, the easiest starting point is to identify its exact nominal width and then look for another product with a nearby width. Next, compare length and shape. For example, someone using a 54 mm straight-walled product may choose another 54 mm product as a starting comparison, but a different material or contour can still change fit.
If your current product is too tight, simply buying anything labelled “large” is less precise than checking its millimetre width. Likewise, if a condom slips, moving to a “snug” label without reading dimensions can overshoot. The purpose of this brand comparison is to replace label-based guessing with model-specific measurements.
Fit is only one possible cause of problems. Application, lubricant choice, storage, expiry, product damage and loss of erection can also matter.
The sizing examples on this page were checked against current manufacturer pages in August 2026. Because manufacturers can revise products, packaging or regional availability, use these links to verify the exact model you plan to buy.
A visual comparison of representative nominal widths. Width alone does not describe length, contour, material or guaranteed fit.
Common questions about comparing Durex, SKYN, Trojan, ONE/MyONE, LELO, Pasante and other condom sizes.